Alpha Microsystems AM-647 Bedienerhandbuch PDF herunterladen (Seite 35)

AM-64x DAT High Capacity Tape Drives Page 31

PDI-00649-00, A01

TAPE EJECTSTATUS LEDS

GREEN YELLOW

ORANGE

Figure 19 - AM-648 DAT Drive Faceplate

•

The green LED will always be lit whenever power is turned on.

•

The orange LED is lit when the DAT drive is processing data or commands.

Never press the tape eject button while the orange LED is on!

•

The yellow LED indicates the DAT drive heads require cleaning. Do not clean the drive until the

yellow LED is lit!

•

When all LEDs are flashing, an error has occurred. You can clear the error by turning the power

off and then back on again.

AM-649 DAT DRIVE STATUS LEDS

The front panel of the AM-649 DAT drive has two status LEDs. The green LED indicates normal tape

functions. The amber LED indicates clean/attention warnings. The various LED displays have the

following meanings:

TAPE EJECT

STATUS LEDS

GREEN

AMBER

Figure 20 - AM-649 DAT Drive Faceplate

•

Green LED slow flashing, Amber LED off = Activity—load, unload, or self-test in progress

•

Green LED fast flashing, Amber LED off = Activity—read or write

•

Green LED on solid, Amber LED off = Cartridge loaded, drive on-line

•

Green LED any display, Amber LED flashing = Heads need cleaning, or the tape cartridge is

near the end of its useful life

•

Green LED any display, Amber LED on solid = Hard fault

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41

Keine Kommentare

Alpha Microsystems AM-647 Bedienerhandbuch Seite 35