
Page 12 Installation Instructions: AM-650 1/4" Streaming Tape Drive
PDI-00650-00, Rev. A00
AM-990 Chassis Installation
The AM-650 is installed in the AM-990's main drive bay using plastic mounting rails. You need two
rails to mount the drive (or any peripheral device). The rails (DWF-20652-00) are included with the
computer chassis and are universal; they can be mounted on either the right or left side of the drive.
Figure 7 shows one of the rails and explains how they are used with various types of peripherals,
including the AM-650:
LONG
END
SHORT
END
PERIPHERAL MOUNTING RAIL
DWF-20652-00
Use the top holes for
mounting full-height devices
Use the bottom holes for
mounting half-height devices
SHORT END
For Tandberg 1/4" streaming tape drives and all hard disk drives, mount
the rails with the short end pointing toward the rear of the computer
LONG END
For DAT tape drives, mount the rails with the long end pointing toward
the rear of the computer cabinet.
Figure 7 - Peripheral Mounting Rails
Figure 8 shows the basic peripheral/rail assembly. The peripheral mounting kit includes both standard
and metric screws for compatibility with all of Alpha Micro's 5.25” peripherals.
Kommentare zu diesen Handbüchern